This V90 electric lock was specially designed for installation on manual or automatic outside outward opening doors and drive-through gates. This type of opening is necessary when the door/gate is situated on a slope or when safety regulations foresee an outward-opening escape route in the event of an emergency. The characteristics and finish make it ideal for installation even in surroundings subject to considerable temperature ranges.
Installation: vertical or horizontal.
Backset: 70 mm.
Service function: the lock opens with the electric impulse and only resets once the gate has been opened and then closed. It is therefore suitable for use with doorclosers and/or all types of automation systems.
Double replaceable coil: which distributes the load uniformly and ensures a long working life.
Voltage: standard 12V AC (on request 12V DC; 24V AC or DC).
Case: one-piece galvanized steel.
Cover: galvanized steel.
Rotating dead-bolt: solid brass.
Cylinder: set up for double or half profile cylinders (not provided).
Striker: galvanized steel, to ensure the correct working of the lock even if there is vertical adjustment between the lock and the striker (caused by weather changes).
Supplied with:
for horizontal installation: galvanized steel striker (item 7928.117), galvanized steel roof-plate and striker plate;
for vertical installation: galvanized steel floor striker (item 9986), galvanized steel roof-plate (item 9989); nylon ring nut and plug, passivated steel support for profile cylinder and fixing screws.
Packaging: single box.
