Front and back plates for use with existing mortice latch or lock.
The existing lock must have either a fixing hole (22mm) below follower (spindle) or two horizontal holes either side of the follower (38mm centres).
Internal doors and external doors
Front and Back Plates only – for use with existing mortice latch or lock
Lever handle lock for doors hung on the left or right
Coded Back to Back plates available – CL500BB – stainless steel finish only
Panic device access kit available – CL500PK – stainless steel finish only
Use in offices / schools / warehouses / hospitals / care homes / nurseries / hotels / leisure facilities / the home
The CL500 and CL505 coded plates are supplied with a random code commencing with the ‘C’ clear button. To change the code after fitting, the lock must first be removed from the door. The code is non sequential, that is the code can be entered in any order e.g. 1234 can be 4321 or 1342 or whatever is the most convenient sequence. With the 11 buttons a total of 2,047 different codes are available, any of which may be entered in any order.
IMPORTANT: Before ordering a Codelocks Front/Back plate set for use on an existing lock case, the current lock case must be tested to ensure it is compatible. Click here for instruction.
* CL500/505 does not require a separate installation template. Please use the neoprene seal that comes with the product. Download instructions opposite for full installation guide.
Brand: Codelocks
Body Material: Zinc Alloy
Codes: 8,191 non sequential codes available
Code free option: CL505
Code change method: Requires removal of lock from door
Code in / code out: No
Code storage: Single code
Door thickness: 35mm – 60mm (1 3/8″ – 2 3/8″)
Non handed: Lock will fit doors hung on the left or right
Spindle type: 2 part 8mm (5/16″) spring loaded spindle
Suitable for: Internal and external use
Type: Front & backplates only
