Front and back plates for use with existing mortice latch or lock. The existing lock must have either a fixing hole (22mm) below follower (spindle) or two horizontal holes either side of the follower (38mm centres).
Internal doors and external doors
Front and Back Plates only – for use with existing mortice latch or lock
Code Free entry option
Lever handle lock for doors hung on the left or right
Available in stainless steel and polished brass
Use in offices / schools / warehouses / hospitals / care homes / nurseries / hotels / leisure facilities / the home
Code Free access option on the keypad
In Code Free mode the outside lever will retract the latchbolt without using a code. This option is ideal for day to day use when punching in a code is not necessary e.g. external doors in a school with high traffic.
Supplied with a random code commencing with the ‘C’ clear button. To change the code after fitting, the lock must first be removed from the door.
The code is non sequential, that is the code can be entered in any order e.g. 1234 can be 4321 or 1342 or whatever is the most convenient sequence. With the 10 buttons a total of 1,023 different codes are available, any of which may be entered in any order.
IMPORTANT: Before ordering a Codelocks Front/Back plate set for use on an existing lock case, the current lock case must be tested to ensure it is compatible. Click here for instruction.
* CL500/505 does not require a separate installation template. Please use the neoprene seal that comes with the product. Download instructions opposite for full installation guide.
Brand: Codelocks
Body Material: Zinc Alloy
Codes: 8,191 non sequential codes available
Code free option: CL505
Code change method: Requires removal of lock from door
Code in / code out: Yes
Code storage: Single code
Door thickness: 35mm – 60mm (1 3/8″ – 2 3/8″)
Non handed: Lock will fit doors hung on the left or right
Spindle type: 2 part 8mm (5/16″) spring loaded spindle
Suitable for: Internal and external use
Type: Front & backplates only
